LAMINATES

Description: Metallised film transfers, with or without thermo-adhesive.

Use: Leather finishing.

Product features:

Width: 1600 mm

Length: 300 m

Core: 76 mm

Polyester thickness: 19/50 µm

Terms of usage: Prior to foil transfer, it is necessary to apply a polyurethane resins pre-treatment onto the leather. 

Hot stamping with rotary press. Transfer temperature: between 85 °C and 95 °C according to the processing speed. NB.: an excessive temperature leads to an alteration of the foil with consequent loss of brightness.

 

Resistances: as tests performed by the producing company

 

Scotch Test: Excellent resistance

 

Veslic Test: very good rub resistance

 

Resistance tests must be performed 12 hours later after transferring.  

Packaging: The film is wrapped in reinforced cardboard tubes, with an inside diameter of 76 mm and it is protected by a cardboard box.

 

Storage method: the product is stored in a closed packaging and kept in a dry place, at a temperature comprised between +15 °C and 25 °C . It fears humidity. Do not overlap materials or weights and store in vertical rolls. Use the product if possible within 4 months.

 

Note: The product complies with all UE regulations.

 

Special warnings: We are available to suggest you the best product to use for leather pre-treatment, from which depends the quality of the final result of the foil itself. We strongly recommend to perform always print/transfer tests onto the supports which you intend to use in order to determine process parameters and desired final results. In relation to the product possible and multiple methods and scopes of application  we do not assume any responsibility in case of misuse.

© 2016 by 2MGA s.r.l.
 

Via del Salice 20
Zona Industriale Macrolotto

Castelfranco di Sotto, 56022

PI - Italy 
P.iva 02112400508
info@2mga.it
tel. 0571-489746
      0571-471620

  • Facebook Social Icon